SGS-Tools - Полный каталог инструмента - 2013 EN

                                                                         для размещения заказа - sgs@sgs-tool.ru

Speed & Feed Recommendations

                25M                 CUT     SPEED     6                8   FEED (mm/flute)                          12             16
               Metric              TYPE     m/min                                  10
 CFRP, AFRP                     Profile         0.040            0.065                                         0.100          0.120
     (Carbon Fiber,                Light     150   0.095            0.145       0.075                             0.235          0.280
     Aramid Fiber)                 Profile   250   0.040            0.065       0.175                             0.100          0.120
                                   Light     120   0.095            0.145       0.075                             0.235          0.280
 GFRP                          Profile   200   0.050            0.080       0.175                             0.125          0.150
     (Fiberglass)                  Light     185   0.115            0.185       0.095                             0.290          0.350
                                   Profile   300   0.050            0.080       0.220                             0.125          0.150
 CARBON,                       Light     305   0.115            0.185       0.095                             0.290          0.350
     GRAPHITE                      Profile   505   0.020            0.035       0.220                             0.050          0.060
                                   Light     15    0.045            0.075       0.040                             0.115          0.140
 PLASTIC                                 25                                 0.085

MACHINABLE CERAMIC,
MACHINABLE GLASS

                 CUT TYPE                   rpm = (1000 x m/min) / (3.14 x D1)
                                            mm/min = (mm/flute) x no. of flutes x rpm
        PROFILE            LIGHT*
                                            • maximum recommended depths shown
Rw = .5 x D1     Rw = .05 x D1              • adjust speed and feed based upon resin type and/or fiber structure
Ad = 1.5 x D1    Ad = L2                    • reduce speed when overheating causes melting or damage to resin
                                            • reduce feed if delamination or fraying occurs
                                            * finish cuts typically require reduced feed and cutting depths
                                            • rates shown are for use without coolant; rates may be increased with coolant use
                                            • dust collection is vital when machining dry
                                            • diamond coating will increase tool life in graphite and composite materials
                                            • refer to the SGS Tool Wizard for more complete technical information

                                              (available at )

208                        ROUTERS                                                                                ROUTEwRSww.sgstool.com

                                                   sgs@sgs-tool.ru

                                                   www.sgs-tool.ru