SGS-Tools - Полный каталог инструмента - 2013 EN

                                            для размещения заказа - sgs@sgs-tool.ru

                                             Speed & Feed Recommendations

                 25                 CUT     SPEED    1/4       5/16  FEED (inch/flute)    1/2                                     3/4
            Fractional             TYPE      sfm                             3/8
 CFRP, AFRP                     Profile         0.0016    0.0025                     0.0040                                  0.0048
     (Carbon Fiber,                Light     500   0.0037    0.0057      0.0030         0.0092                                  0.0110
     Aramid Fiber)                 Profile   825   0.0016    0.0025      0.0069         0.0040                                  0.0048
                                   Light     400   0.0037    0.0057      0.0030         0.0092                                  0.0110
 GFRP                          Profile   660   0.0020    0.0031      0.0069         0.0050                                  0.0060
     (Fiberglass)                  Light     600   0.0046    0.0072      0.0038         0.0115                                  0.0138
                                   Profile   990   0.0020    0.0031      0.0086         0.0050                                  0.0060
 CARBON,                       Light    1000   0.0046    0.0072      0.0038         0.0115                                  0.0138
     GRAPHITE                      Profile  1650   0.0008    0.0013      0.0086         0.0020                                  0.0024
                                   Light     50    0.0018    0.0029      0.0015         0.0046                                  0.0055
 PLASTIC                                 85                          0.0034

MACHINABLE CERAMIC,
MACHINABLE GLASS

                 CUT TYPE                   rpm = sfm x 3.82 / D1
                                            ipm = (inch/flute) x no. of flutes x rpm
        PROFILE            LIGHT*
                                            • maximum recommended depths shown
Rw = .5 x D1     Rw = .05 x D1              • adjust speed and feed based upon resin type and/or fiber structure
Ad = 1.5 x D1    Ad = L2                    • reduce speed when overheating causes melting or damage to resin
                                            • reduce feed if delamination or fraying occurs
                                            * finish cuts typically require reduced feed and cutting depths
                                            • rates shown are for use without coolant; rates may be increased with coolant use
                                            • dust collection is vital when machining dry
                                            • diamond coating will increase tool life in graphite and composite materials
                                            • refer to the SGS Tool Wizard for more complete technical information

                                              (available at )

                 ROUTERS                                             ROUTERS                                                            207

                                            sgs@sgs-tool.ru
                                            www.sgs-tool.ru