SGS-Tools - Инструмент для обработки композитных материалов - 2013 EN
для размещения заказа - sgs@sgs-tool.ru
Series 120 Speed & Feed Recommendations
120 Speed (sfm) 1/8 3/16 Feed (inch/rev) 3/8 7/16 1/2
(FRACTIONAL) CVD 0.0008 1/4 5/16 0.0018 0.0021 0.0024
0.0012 0.0015
CFRP, AFRP 320 0.0006 0.0008 0.0018 0.0021 0.0024
(Carbon Fiber, Aramid Fiber) 0.0012 0.0015
GFRP 240 0.0006
(Fiberglass)
CARBON, GRAPHITE 400 0.0008 0.0012 0.0016 0.0020 0.0024 0.0028 0.0032
Adjust speed and/or feed based upon rpm = sfm x 3.82 / D1 Refer to the SGS Tool Wizard for more complete
resin type and/or fiber structure ipm = (inch/rev) x rpm technical information (available at )
120-M Speed (sfm) 2.5 3 Feed (mm/rev) 8 10 12
(METRIC) CVD 0.015 0.018 4.1 6 0.038 0.046 0.053
CFRP, AFRP 100 0.018 0.020 0.030 0.038 0.046 0.053
(Carbon Fiber, Aramid Fiber)
GFRP 75 0.015 0.020 0.030
(Fiberglass)
CARBON, GRAPHITE 120 0.020 0.024 0.030 0.041 0.051 0.061 0.071
Adjust speed and/or feed based upon rpm = (1000 x m/min) / (3.14 x D1) Refer to the SGS Tool Wizard for more complete
resin type and/or fiber structure mm/min = (mm/rev) x rpm technical information (available at )
sgs@sgs-tool.ru 7
www.sgs-tool.ru
