SGS-Tools - Инструмент для обработки композитных материалов - 2013 EN

                                       для размещения заSкeазrаie- ssg2s@5,sg2s7-tool.ruSpeed & Feed Recommendations

             25M, 27M           Cut    Speed             6                8   Feed (mm/flute)    12     16
             (METRIC)          Type    m/min          0.040            0.065            10     0.100  0.120
          CFRP, AFRP           Slot                   0.040            0.065                   0.100  0.120
(Carbon Fiber, Aramid Fiber)  Profile   120           0.095            0.145        0.075      0.235  0.280
                              Light     150           0.040            0.065        0.075      0.100  0.120
              GFRP             Slot     250           0.040            0.065        0.175      0.100  0.120
          (Fiberglass)        Profile   100           0.095            0.145        0.075      0.235  0.280
                              Light     120           0.050            0.080        0.075      0.125  0.150
   CARBON, GRAPHITE            Slot     200           0.050            0.080        0.175      0.125  0.150
                              Profile   145           0.115            0.185        0.095      0.290  0.350
            PLASTIC           Light     185           0.050            0.080        0.095      0.125  0.150
                               Slot     300           0.050            0.080        0.220      0.125  0.150
MACHINABLE CERAMIC,           Profile   245           0.115            0.185        0.095      0.290  0.350
  MACHINABLE GLASS            Light     305           0.020            0.035        0.095      0.050  0.060
                               Slot     505           0.020            0.035        0.220      0.050  0.060
                              Profile    10           0.045            0.075        0.040      0.115  0.140
                              Light      15                                         0.040
                                         25                                         0.085

Cut Type  Profile                      Light          rpm = (1000 x m/min) / (3.14 x D1)
                                                      mm/min = (mm/flute) x no. of flutes x rpm
Slot      25M, 27M                     25M, 27M
          Rw = .5 x D1                 Rw = .05 x D1  - maximum recommended depths shown
27M       Ad = 1.5 x D1                Ad = L2        - adjust speed and feed based upon resin type and/or fiber structure
Rw = D1                                               - reduce speed when overheating causes melting or damage to resin
Ad = D1                                               - reduce feed if delamination or fraying occurs
                                                      - finish cuts typically require reduced feed and cutting depths
                                                      - rates shown are for use without coolant; rates may be increased with coolant use
                                                      - dust collection is vital when machining dry
                                                      - diamond coating will increase tool life in graphite and composite materials
                                                      - refer to the SGS Tool Wizard for more complete

                                                       technical information (available at )

                                                      sgs@sgs-tool.ru                                                                     19
                                                      www.sgs-tool.ru