SGS-Tools - Инструмент для обработки композитных материалов - 2013 EN

    Series 25, 27                          для размещения заказа - sgs@sgs-tool.ru

                   Speed & Feed Recommendations

                    25, 27          Cut    Speed             1/4             5/16   Feed (inch/flute)     1/2     3/4
             (FRACTIONAL)          Type     sfm           0.0016           0.0025            3/8       0.0040  0.0048
                                   Slot     400           0.0016           0.0025                      0.0040  0.0048
              CFRP, AFRP          Profile   500           0.0037           0.0057        0.0030        0.0092  0.0110
    (Carbon Fiber, Aramid Fiber)  Light     825           0.0016           0.0025        0.0030        0.0040  0.0048
                                   Slot     320           0.0016           0.0025        0.0069        0.0040  0.0048
                  GFRP            Profile   400           0.0037           0.0057        0.0030        0.0092  0.0110
              (Fiberglass)        Light     660           0.0020           0.0031        0.0030        0.0050  0.0060
                                   Slot     480           0.0020           0.0031        0.0069        0.0050  0.0060
       CARBON, GRAPHITE           Profile   600           0.0046           0.0072        0.0038        0.0115  0.0138
                                  Light     990           0.0020           0.0031        0.0038        0.0050  0.0060
                PLASTIC            Slot     800           0.0020           0.0031        0.0086        0.0050  0.0060
                                  Profile  1000           0.0046           0.0072        0.0038        0.0115  0.0138
    MACHINABLE CERAMIC,           Light    1650           0.0008           0.0013        0.0038        0.0020  0.0024
      MACHINABLE GLASS             Slot      40           0.0008           0.0013        0.0086        0.0020  0.0024
                                  Profile    50           0.0018           0.0029        0.0015        0.0046  0.0055
                                  Light      85                                          0.0015
                                                                                         0.0034

    Cut Type       Profile                 Light          rpm = sfm x 3.82 / D1
                                                          ipm = (inch/flute) x no. of flutes x rpm
    Slot           25, 27                  25, 27
                   Rw = .5 x D1            Rw = .05 x D1  - maximum recommended depths shown
    27             Ad = 1.5 x D1           Ad = L2        - adjust speed and feed based upon resin type and/or fiber structure
    Rw = D1                                               - reduce speed when overheating causes melting or damage to resin
    Ad = D1                                               - reduce feed if delamination or fraying occurs
                                                          - finish cuts typically require reduced feed and cutting depths
                                                          - rates shown are for use without coolant; rates may be increased with coolant use
                                                          - dust collection is vital when machining dry
                                                          - diamond coating will increase tool life in graphite and composite materials
                                                          - refer to the SGS Tool Wizard for more complete

                                                           technical information (available at )

18                                                        sgs@sgs-tool.ru
                                                          www.sgs-tool.ru