SGS-Tools - Инструмент для обработки композитных материалов - 2013 EN

                                       для размещения заказа - sgs@sgs-tool.ru

                                                         Series 20, 31 Speed & Feed Recommendations

             20M, 31M           Cut    Speed            1.6               3   Feed (mm/rev)    10      12
             (METRIC)          Type    m/min          0.030            0.060           6     0.230   0.305
          CFRP, AFRP           Slot                   0.030            0.060                 0.230   0.305
(Carbon Fiber, Aramid Fiber)  Profile   120           0.070            0.140       0.120     0.525   0.700
                              Light     150           0.030            0.060       0.120     0.230   0.305
              GFRP             Slot     250           0.030            0.060       0.280     0.230   0.305
          (Fiberglass)        Profile   100           0.070            0.140       0.120     0.525   0.700
                              Light     120           0.040            0.075       0.120     0.290   0.380
   CARBON, GRAPHITE            Slot     200           0.040            0.075       0.280     0.290   0.380
                              Profile   145           0.090            0.175       0.150     0.655   0.875
            PLASTIC           Light     185           0.040            0.075       0.150     0.290   0.380
                               Slot     300           0.040            0.075       0.350     0.290   0.380
MACHINABLE CERAMIC,           Profile   245           0.090            0.175       0.150     0.655   0.875
  MACHINABLE GLASS            Light     305           0.015            0.030       0.150     0.115   0.150
                               Slot     505           0.015            0.030       0.350     0.115   0.150
                              Profile    10           0.035            0.070       0.060     0.260   0.350
                              Light      15                                        0.060
                                         25                                        0.135

 Cut Type  Profile                     Light          rpm = (1000 x m/min) / (3.14 x D1)
                                                      mm/min = (mm/rev) x rpm
Slot       31M                         20M, 31M
           Rw = .5 x D1                Rw = .05 x D1  - maximum recommended depths shown
31M        Ad = 1.5 x D1               Ad = L2        - adjust speed and feed based upon resin type and/or fiber structure
Rw = D1                                               - reduce speed when overheating causes melting or damage to resin
Ad = D1                                               - reduce feed if delamination or fraying occurs
                                                      - finish cuts typically require reduced feed and cutting depths
                                                      - rates shown are for use without coolant; rates may be increased with coolant use
                                                      - dust collection is vital when machining dry
                                                      - diamond coating will increase tool life in graphite and composite materials
                                                      - refer to the SGS Tool Wizard for more complete

                                                       technical information (available at )

                                                      sgs@sgs-tool.ru                                                                     13
                                                      www.sgs-tool.ru