SGS-Tools - Полный каталог инструмента - 2014 EN

                                  для размещения заказа - sgs@sgs-tool.ru

                                                                                                          S-Carb End Mills

                                                                           POS

                                                             RH

TOLERANCES (inch)       Cutting   Length     inch    Shank   Reach                    EDP No.                47EB
                       Diameter   of Cut           Diameter                Uncoated Ti-NAMITE-B
1/4–3/8 DIAMETER                          Overall               L3                                        Fractional Series
D1	= +0.0000/–0.00035       D1       l2   Length        D2                                        (TiB2)           tech info 92
D2	= h6                                                      2-1/8
                          1/4       3/8       L1      1/4    2-1/8         34650  34686                            NON-FERROUS
1/2–5/8 DIAMETER          3/8       1/2               3/8    2-1/8         34651  34687
D1	= +0.0000/–0.00043     1/2       5/8       4       1/2    3-3/8         34652  34688                               PLASTICS/COMPOSITES
D2	= h6                   1/2       5/8       4       1/2    3-3/8         34653  34689
                          5/8       3/4       6       5/8    2-3/8         34654  34691
3/4–1 DIAMETER            5/8       3/4       6       5/8    2-1/2         34655  34690
D1	= +0.0000/–0.00051     3/4        1        6       3/4    3-3/8         34656  34693
D2	= h6                   3/4        1        6       3/4                  34657  34692
                                              6
                                              6

TOLERANCES (mm)         Cutting   Length     mm      Shank   Reach                    EDP No.             47MEB
                       Diameter   of Cut           Diameter                Uncoated Ti-NAMITE-B                Metric Series
6 DIAMETER                                Overall               L3                                                tech info 94
D1	= +0,000/–0,008          D1       l2   Length        D2                                        (TiB2)
D2	= h6                                                       54,0
                          6,0      10,0       L1      6,0     54,0         44581  44615
>6–10 DIAMETER            8,0      12,0               8,0     54,0         44582  44616
D1	= +0,000/–0,009       10,0      12,0    100,0     10,0     80,0         44583  44617
D2	= h6                  12,0      16,0    100,0     12,0     80,0         44584  44618
                         16,0      20,0    100,0     16,0     80,0         44585  44619
>10–18 DIAMETER          20,0      25,0    150,0     20,0                  44586  44620
D1	= +0,000/–0,011                         150,0
D2	= h6                                    150,0

>18–20 DIAMETER
D1	= +0,000/–0,013
D2	= h6

                       END MILLS                                                  END MILLS               57

                                          sgs@sgs-tool.ru
                                          www.sgs-tool.ru