для размещения заказа - sgs@sgs-tool.ru
Ski-Carb End Mills
POS
RH
TOLERANCES (mm) mm EDP No. 44M
3 DIAMETER Cutting Length Overall Shank Corner UNCoated UNCoated Ti-NAMITE-B Ti-NAMITE-B Metric Series
D1 = +0,000/–0,006 Dia. of Cut Length Dia. Radius* w/Flat w/O Flat (TiB2) (TiB2) tech info 94
D2 = h6 D1 l2 L1 D2 w/flat w/O flat
R = +0,000/–0,050 R NON-FERROUS
>3–6 DIAMETER 3,0 8,0 52,0 6,0 0,36–0,76 44505 49663 44506 49674 PLASTICS/COMPOSITES
D1 = +0,000/–0,008
D2 = h6 4,0 11,0 55,0 6,0 0,36–0,76 44509 49664 44510 49675
R = +0,000/–0,050
5,0 13,0 57,0 6,0 0,36–0,76 44513 49665 44514 49676
>6–10 DIAMETER
D1 = +0,000/–0,009 6,0 13,0 57,0 6,0 0,36–0,76 44517 49666 44518 49677
D2 = h6
R = +0,000/–0,050 8,0 19,0 69,0 10,0 0,38–1,52 44521 49667 44522 49678
>10–18 DIAMETER 10,0 22,0 72,0 10,0 0,38–1,52 44525 49668 44526 49679
D1 = +0,000/–0,011
D2 = h6 12,0 26,0 83,0 12,0 0,38–3,17 44529 49669 44530 49680
R = +0,000/–0,050
14,0 26,0 83,0 14,0 0,38–3,17 44533 49670 44534 49681
>18–20 DIAMETER
D1 = +0,000/–0,013 16,0 32,0 92,0 16,0 0,38–3,17 44537 49671 44538 49682
D2 = h6
R = +0,000/–0,050 18,0 32,0 92,0 18,0 0,38–3,17 44541 49672 44542 49683
20,0 38,0 104,0 20,0 0,38–3,17 44545 49673 44546 49684
*Contact your SGS Sales Representative for more information on Corner Radius options.
END MILLS END MILLS 45
sgs@sgs-tool.ru
www.sgs-tool.ru
