SGS-Tools - Полный каталог инструмента - 2014 EN

                                        для размещения заказа - sgs@sgs-tool.ru

ICe-Carb Internal Coolant Drills

                                        RH

140 5xD                                                                                                  TOLERANCES (inch)

Fractional & METRIC Series                                                                               .1181 DIAMETER
                                                                                                         D1 = +.00008/+.00047
tech info 185–188                                  mm EDP NO.                                            D2 = h6

   STEELS             Cutting Decimal    Tap Size    Shank Overall FLUTE CLEARED SHANK Ti-NAMITE-A       >.1181–.2362 DIAMETER
   STAINLESS STEELS  Diameter Equiv.    Reference  Diameter Length Length LENGTH Length (AlTiN)          D1 = +.00016/+.00063
   CAST IRON                                                                                             D2 = h6
   HIGH TEMP ALLOYS       d1               Only         d2 l1 l2 l3 l4
   TITANIUM                                                                                              >.2362–.3937 DIAMETER
   HARDENED STEELS   21/64 0.3281 3/8-20           10,0 103,0 61,0 49,0 40,0 51921                       D1 = +.00024/+.00083
                                                                                                         D2 = h6
                     8,4 mm 0.3307                 10,0 103,0 61,0 49,0 40,0 63951
                                                                                                         >.3937–.7087 DIAMETER
                            Q 0.3320 3/8-24        10,0 103,0 61,0 49,0 40,0 51922                       D1 = +.00028/+.00098
                                                                                                         D2 = h6
                     8,5 mm 0.3346 M10 X 1,5 10,0 103,0 61,0 49,0 40,0 63952
                                                                                                         >.7087–1.1811 DIAMETER
                     8,6 mm 0.3386                 10,0 103,0 61,0 49,0 40,0 63953                       D1 = +.00031/+.00114
                                                                                                         D2 = h6
                     8,7 mm 0.3425                 10,0 103,0 61,0 49,0 40,0 63954
                                                                                                         TOLERANCES (mm)
                     11/32 0.3438 3/8-32           10,0 103,0 61,0 49,0 40,0 51923
                                                                                                         3 DIAMETER
                     8,8 mm 0.3465 M10 X 1,25 10,0 103,0 61,0 49,0 40,0 63955                            D1 = +0,002/+0,012
                                                                                                         D2 = h6
                     8,9 mm 0.3504                 10,0 103,0 61,0 49,0 40,0 63956
                                                                                                         >3–6 DIAMETER
                     9,0 mm 0.3543 M10 X 1 10,0 103,0 61,0 49,0 40,0 63957                               D1 = +0,004/+0,016
                                                                                                         D2 = h6
                     9,1 mm 0.3583                 10,0 103,0 61,0 49,0 40,0 63958
                                                                                                         >6–10 DIAMETER
                     23/64 0.3594                  10,0 103,0 61,0 49,0 40,0 51924                       D1 = +0,006/+0,021
                                                                                                         D2 = h6
                     9,2 mm 0.3622 M10 X 0,75 10,0 103,0 61,0 49,0 40,0 63959
                                                                                                         >10–18 DIAMETER
                     9,3 mm 0.3661                 10,0 103,0 61,0 49,0 40,0 63960                       D1 = +0,007/+0,025
                                                                                                         D2 = h6
                            U 0.3680 7/16-14       10,0 103,0 61,0 49,0 40,0 51925
                                                                                                         >18–30 DIAMETER
                     9,4 mm 0.3701                 10,0 103,0 61,0 49,0 40,0 63961                       D1 = +0,008/+0,029
                                                                                                         D2 = h6
                     9,5 mm 0.3740 M11 / M10 X 0,5 10,0 103,0 61,0 49,0 40,0 63962

                            3/8 0.3750             10,0 103,0 61,0 49,0 40,0 51926

                     9,6 mm 0.3780                 10,0 103,0 61,0 49,0 40,0 63963

                     9,7 mm 0.3819                 10,0 103,0 61,0 49,0 40,0 63964

                     9,8 mm 0.3858                 10,0 103,0 61,0 49,0 40,0 63965

                     9,9 mm 0.3898                 10,0 103,0 61,0 49,0 40,0 63966

                     25/64 0.3906 7/16-20          10,0 103,0 61,0 49,0 40,0 51927

                     10,0 mm 0.3937                10,0 103,0 61,0 49,0 40,0 63967

                     10,1 mm 0.3976                12,0 118,0 71,0 56,0 45,0 63968

                     10,2 mm 0.4016 M12 X 1,75 12,0 118,0 71,0 56,0 45,0 63969

                     10,3 mm 0.4055                12,0 118,0 71,0 56,0 45,0 63970

                     13/32 0.4062                  12,0 118,0 71,0 56,0 45,0 51928

                     10,4 mm 0.4094                12,0 118,0 71,0 56,0 45,0 63971

                     10,5 mm 0.4134 M12 X 1,5 12,0 118,0 71,0 56,0 45,0 63972

                     10,6 mm 0.4173                12,0 118,0 71,0 56,0 45,0 63973

                     10,7 mm 0.4213                12,0 118,0 71,0 56,0 45,0 63974

                                                                                 continued on next page

172                         DRILLS                                               DRILLS

                                                   sgs@sgs-tool.ru

                                                   www.sgs-tool.ru