SGS-Tools - Полный каталог инструмента - 2013 EN

                                                                         для размещения заказа - sgs@sgs-tool.ru

Speed & Feed Recommendations

             7M, 7MB             HARDNESS   CUT    SPEED      3               6                                   FEED (mm/flute)    20         25
               Metric             BRINELL  Type    m/min                                                          10 12
                                                          0.0166           0.043                                                   0.147      0.160
 CARBON STEEL                    175   Finish   250                                                           0.093  0.110     0.147      0.160
     1018, 1040, 1080, 1090,               Finish                                                                                  0.109      0.120
     10L50, 1140, 1212, 12L15,     > 175   Finish  220 0.0166 0.043                                               0.093  0.110     0.109      0.120
     1525, 1536                     275   Finish                                                                                  0.077      0.085
                                           Finish                                                                                  0.064      0.070
 ALLOY STEEL                   275     Finish  185 0.0122 0.034                                               0.069  0.082     0.117      0.130
     4140, 4150, 4320, 5120,              Finish                                                                                  0.117      0.130
     5150, 8630, 86L20, 50100    > 275     Finish  125 0.0122 0.034                                               0.069  0.082     0.077      0.085
                                  375     Finish                                                                                  0.072      0.078
                                           Finish
 TOOL STEEL                    250             170 0.0086 0.024                                               0.048  0.058     0.064      0.070
     A2, D2, H13, L2, M2,                  Finish
     P20, S7, T15, W2            > 250             105 0.0070 0.019                                               0.040  0.048     0.080      0.088
                                  375     Finish
                                                                                                                                   0.061      0.085
 CAST IRON                     220     Finish  185 0.0132 0.036                                               0.075  0.089
     Gray, Malleable, Ductile    > 220
                                  260             135 0.0132 0.036                                               0.075  0.089
 STAINLESS (free machining)    275
     303, 416, 420F, 430F, 440F   275             130 0.0086 0.024                                               0.048  0.058

 STAINLESS (difficult)         325             90 0.0082 0.022                                                0.045  0.048
     304, 304L, 316, 316L
                                  350             80 0.0070 0.019                                                0.040  0.048
 STAINLESS (PH)
     17-4PH, 15-5PH, Custom       300             90 0.0091 0.024                                                0.051  0.060
     450, 16-6PH, PH13-8Mo                         25 0.0072 0.019
                                                                                                                  0.037  0.046
 TITANIUM
     Ti5Al-5V-5Mo,
     Ti6Al4V, Ti-7Al4Mo

 HIGH TEMPERATURE ALLOY
     Inconel, Rene, Waspalloy

              CUT TYPE           rpm = (1000 x m/min) / (3.14 x D1)
                FINISH           mm/min = (mm/flute) x 4 x rpm

Rw = .02 x D1                    • maximum recommended depths shown
Ad = L2                          • adjust feed as required for optimum results
                                 • reduce speed and feed for materials harder than listed
                                 • refer to the SGS Tool Wizard for more complete technical information

                                   (available at )

64                                                        sgs@sgs-tool.ru                                                          END MILLS
                                                          www.sgs-tool.ru
                              END MILLS