SGS-Tools - Полный каталог инструмента - 2013 EN

                                                 для размещения заказа - sgs@sgs-tool.ru

S-Carb End Mills

                                                          POS

                                                 RH

43CR                     CUTTING         LENGTH     inch         SHANK   CORNER             EDP NO.             TOLERANCES (inch)
                        DIAMETER         OF CUT                DIAMETER  RADIUS  UNCOATED Ti-NAMITE-B
FRACTIONAL SERIES                                OVERALL                                                        1/8–3/16 DIAMETER
TECH INFO 71                 D1             L2   LENGTH             D2       R                          (TiB2)  D1	= +0.000/–0.00032
                                                                                                                D2	= h6
   NON-FERROUS             1/8             3/8       L1           1/8     0.010  34771    34793                 R	= +0.000/–0.002
                          3/16            9/16                   3/16     0.010  34772    34794
   PLASTICS/COMPOSITES     1/4             3/4    1-1/2           1/4     0.010  34773    34795                 1/4–3/8 DIAMETER
                           1/4             3/4       2            1/4     0.030  34774    34796                 D1	= +0.000/–0.00035
                          5/16             5/8                   5/16     0.030  34775    34797                 D2	= h6
                           3/8                    2-1/2           3/8     0.010  34776    34798                 R	= +0.000/–0.002
                           3/8              1     2-1/2           3/8     0.030  34777    34799
                           3/8              1     2-1/2           3/8     0.060  32761    32825                 1/2–5/8 DIAMETER
                           1/2              1     2-1/2           1/2     0.010  34778    34800                 D1	= +0.000/–0.00043
                           1/2            1-1/4   2-1/2           1/2     0.030  34779    34801                 D2	= h6
                           1/2            1-1/4   2-1/2           1/2     0.060  34780    34802                 R	= +0.000/–0.002
                           1/2            1-1/4   3-1/4           1/2     0.090  34781    34803
                           1/2            1-1/4   3-1/4           1/2     0.120  32766    32830                 3/4–1 DIAMETER
                           5/8            1-1/4   3-1/4           5/8     0.030  34782    34804                 D1	= +0.000/–0.00051
                           5/8            1-5/8   3-1/4           5/8     0.060  34783    34805                 D2	= h6
                           5/8            1-5/8   3-1/4           5/8     0.090  34784    34806                 R	= +0.000/–0.002
                           3/4            1-5/8   3-3/4           3/4     0.030  34785    34807
                           3/4            1-5/8   3-3/4           3/4     0.060  34786    34808
                           3/4            1-5/8   3-3/4           3/4     0.090  34787    34809
                           3/4            1-5/8                   3/4     0.120  34815    34817
                                          1-5/8      4                    0.030  34789    34811
                            1               2        4             1      0.060  34790    34812
                            1               2        4             1      0.090  34791    34813
                            1               2        4             1      0.120  34816    34818
                            1               2     4-1/2            1
                                                  4-1/2
                                                  4-1/2
                                                  4-1/2

44                                                             sgs@sgs-tool.ru            END MILLS
                                                               www.sgs-tool.ru
                              END MILLS