SGS-Tools - Полный каталог инструмента - 2013 EN

                                          для размещения заказа - sgs@sgs-tool.ru

                                           Speed & Feed Recommendations

               20, 31             CUT     SPEED             1/16             1/8   FEED (inch/rev)    3/8     1/2
            Fractional           TYPE      sfm                                            1/4
 CFRP, AFRP                    Slot                    0.0012           0.0024                   0.0090  0.0120
     (Carbon Fiber,              Profile   400            0.0012           0.0024      0.0048       0.0090  0.0120
     Aramid Fiber)               Light     500            0.0028           0.0056      0.0048       0.0207  0.0276
                                  Slot     825            0.0012           0.0024      0.0111       0.0090  0.0120
 GFRP                        Profile   320            0.0012           0.0024      0.0048       0.0090  0.0120
     (Fiberglass)                Light     400            0.0028           0.0056      0.0048       0.0207  0.0276
                                  Slot     660            0.0015           0.0030      0.0111       0.0114  0.0150
 CARBON,                     Profile   480            0.0015           0.0030      0.0060       0.0114  0.0150
     GRAPHITE                    Light     600            0.0035           0.0069      0.0060       0.0258  0.0345
                                  Slot     990            0.0015           0.0030      0.0138       0.0114  0.0150
 PLASTIC                     Profile   800            0.0015           0.0030      0.0060       0.0114  0.0150
                                 Light    1000            0.0035           0.0069      0.0060       0.0258  0.0345
MACHINABLE CERAMIC,               Slot    1650            0.0006           0.0012      0.0138       0.0045  0.0060
MACHINABLE GLASS                 Profile   40             0.0006           0.0012      0.0024       0.0045  0.0060
                                 Light     50             0.0014           0.0027      0.0024       0.0102  0.0138
                                           85                                          0.0054

          SLOT         CUT TYPE                   LIGHT*  rpm = sfm x 3.82 / D1
                        PROFILE                           ipm = (inch/rev) x rpm
31                                        20, 31
Rw = D1         31                        Rw = .05 x D1   • maximum recommended depths shown
Ad = D1         Rw = .5 x D1              Ad = L2         • adjust speed and feed based upon resin type and/or fiber structure
                Ad = 1.5 x D1                             • reduce speed when overheating causes melting or damage to resin
                                                          • reduce feed if delamination or fraying occurs
                                                          * finish cuts typically require reduced feed and cutting depths
                                                          • rates shown are for use without coolant; rates may be increased with

                                                            coolant use
                                                          • dust collection is vital when machining dry
                                                          • diamond coating will increase tool life in graphite and composite materials
                                                          • refer to the SGS Tool Wizard for more complete technical information

                                                            (available at )

                ROUTERS                                                            ROUTERS                                               205

                                                          sgs@sgs-tool.ru
                                                          www.sgs-tool.ru