SGS-Tools - Полный каталог инструмента - 2013 EN

                                    для размещения заказа - sgs@sgs-tool.ru

                                     Speed & Feed Recommendations

              52M, 54M               CUT     SPEED              3               6   FEED (mm/flute)     20     25
                Metric               Type    m/min                                  10 12
                                                            0.0151           0.041                    0.133  0.148
 A LUMINUM ALLOY                  Slot     330           0.0166           0.043  0.085  0.101      0.147  0.160
     2024, 5052, 5086,              Profile   415           0.0348           0.094                    0.309  0.338
     6061, 6063, 7075               Light     685           0.0151           0.041  0.091  0.110      0.133  0.148
                                     Slot     125           0.0166           0.043                    0.147  0.160
 A LUMINUM DIE CAST ALLOY        Profile   155           0.0348           0.094  0.192  0.230      0.309  0.338
     (High Silicon)                 Light     255           0.0086           0.024                    0.077  0.085
     A-390, A-392, B-390             Slot     145           0.0094           0.024  0.085  0.101      0.083  0.093
                                    Profile   180           0.0199           0.053                    0.176  0.193
 C OPPER ALLOY                   Light     300           0.0086           0.024  0.091  0.110      0.077  0.085
     Aluminum Bronze, Muntz          Slot     60            0.0094           0.024                    0.083  0.093
     Brass, Naval Brass, Red Brass  Profile   70            0.0199           0.053  0.192  0.230      0.176  0.193
                                    Light     120           0.0240           0.065                    0.219  0.238
 C OPPER ALLOY                    Slot     390           0.0264           0.072  0.048  0.058      0.237  0.250
     Beryllium Copper, C110,        Profile   490           0.0552           0.149                    0.499  0.550
     Manganese Bronze, Tin Bronze   Light     805           0.0180           0.048  0.053  0.062      0.160  0.175
                                     Slot     175           0.0197           0.053                    0.173  0.190
PLASTIC                          Profile   220           0.0413           0.110  0.109  0.132      0.368  0.040
     ABS, Polycarbonate,            Light     360
     PVC, Polypropylene                                                             0.048  0.058

PLASTIC                                                                          0.053  0.062
     Fiberglass, Glass Filled
                                                                                    0.109  0.132

                                                                                    0.136  0.163

                                                                                    0.149  0.178

                                                                                    0.312  0.374

                                                                                    0.101  0.120

                                                                                    0.109  0.132

                                                                                    0.229  0.276

           SLOT                     CUT TYPE                       LIGHT*    rpm = (1000 x m/min) / (3.14 x D1)
                                                   PROFILE                   mm/min = (mm/flute) x 6 x rpm
                                                            Series 52, 54
Series 52  Series 54                Series 52, 54           Rw = .05 x D1    • maximum recommended depths shown
Rw = D1    Rw = D1                  Rw = .3 x D1            Ad = 1.5 x D1    * finish cuts typically require reduced feed and cutting depths
Ad = D1    Ad = .25 x D1            Ad = 1.5 X D1
                                                                               of .02 x D1 maximum
                                                                             • refer to the SGS Tool Wizard for more complete technical

                                                                               information
                                                                               (available at )

           END MILLS                                                                       END MILLS                119

                                                            sgs@sgs-tool.ru
                                                            www.sgs-tool.ru