Фрезы и прочий твердосплавный инструмент
SGS-Tools - Каталог для Европейских стран - 2014 EN
для размещения заказа - sgs@sgs-tool.ru
Speed & Feed Recommendations
MK2M HARDNESS CUT SPEED .20 .41 FEED (mm/flute) 1.02 1.52
Metric BRINELL Type m/min .79
CARBON STEEL 0.00041 0.0008 0.0023 0.0033
1018, 1040, 1080, 175 Slot 78 0.00046 0.0010 0.0015 0.0028 0.0036
10L50, 1525, 1536 275 Profile 98 0.00094 0.0018 0.0018 0.0056 0.0074
250 Finish 127 0.00030 0.0005 0.0036 0.0018 0.0023
ALLOY STEEL 220 Slot 57 0.00036 0.0008 0.0013 0.0020 0.0028
4140, 4150, 4340, 275 Profile 72 0.00071 0.0013 0.0013 0.0041 0.0056
5150, 8630 275 Finish 93 0.00030 0.0005 0.0028 0.0018 0.0023
350 Slot 54 0.00036 0.0008 0.0013 0.0020 0.0028
TOOL STEEL 300 Profile 67 0.00071 0.0013 0.0013 0.0041 0.0056
A2, D2, H13, L2, M2, 150 Finish 87 0.00041 0.0008 0.0028 0.0023 0.0033
P20, S7, T15, W2 140 Slot 57 0.00046 0.0010 0.0015 0.0028 0.0036
Profile 72 0.00094 0.0018 0.0018 0.0056 0.0074
CAST IRON Finish 93 0.00030 0.0005 0.0036 0.0018 0.0023
Gray, Malleable, Ductile Slot 63 0.00036 0.0008 0.0013 0.0020 0.0028
Profile 79 0.00071 0.0013 0.0013 0.0041 0.0056
STAINLESS (free machining) Finish 103 0.00025 0.0005 0.0028 0.0015 0.0020
303, 420F, 440F Slot 44 0.00028 0.0005 0.0010 0.0015 0.0023
Profile 55 0.00056 0.0010 0.0010 0.0033 0.0043
STAINLESS (difficult) Finish 71 0.00025 0.0005 0.0023 0.0015 0.0020
304, 316, 17-4PH Slot 30 0.00028 0.0005 0.0010 0.0015 0.0023
Profile 38 0.00056 0.0010 0.0010 0.0033 0.0043
TITANIUM Finish 49 0.00020 0.0005 0.0023 0.0013 0.0015
Ti5Al-5V-5Mo, Slot 11 0.00023 0.0005 0.0008 0.0013 0.0018
Ti6Al4V, Ti-7Al4Mo Profile 14 0.00046 0.0010 0.0010 0.0028 0.0036
Finish 18 0.00081 0.0015 0.0018 0.0048 0.0064
HIGH TEMP ALLOY Slot 195 0.00094 0.0018 0.0033 0.0056 0.0074
Incoloy, Inconel, Profile 244 0.00185 0.0036 0.0036 0.0109 0.0145
Rene, Waspalloy Finish 317 0.00041 0.0008 0.0074 0.0023 0.0033
Slot 59 0.00046 0.0010 0.0015 0.0028 0.0036
ALUMINUM Profile 73 0.00094 0.0018 0.0018 0.0056 0.0074
2017, 2024, 356, Finish 95 0.00081 0.0015 0.0036 0.0048 0.0064
6061, 7075 Slot 195 0.00094 0.0018 0.0033 0.0056 0.0074
Profile 244 0.00185 0.0036 0.0036 0.0109 0.0145
COPPER ALLOY Finish 317 0.00081 0.0015 0.0074 0.0048 0.0064
Aluminum Bronze, Slot 146 0.00094 0.0018 0.0033 0.0056 0.0074
C110, Muntz Brass Profile 183 0.00185 0.0036 0.0036 0.0109 0.0145
Finish 238 0.0074
PLASTIC
Polycarbonate,
PVC, Polypropylene
GRAPHITE
SLOT CUT TYPE LIGHT* rpm = (1000 x m/min) / (3.14 x D1)
PROFILE mm/min = (mm/flute) x 2 x rpm
ap = D1 ap = 1.5 x D1 • maximum recommended depths shown
ae = D1 ap = 1.5 x D1 ae = 0.05 x D1 • reduce speed to meet machine limitations
ae = 0.5 x D1 • reduce speed and feed for materials harder than listed
* finish cuts typically require reduced feed and cutting depths of
0.02 x D1 maximum
• refer to the SGS Tool Wizard for more complete technical information
(available at )
82 END MILLS
sgs@sgs-tool.ru www.sgs-tool.ru